Type | EB-C1 | EB-C1P |
|
NPN | PNP |
|
Light source | Red LED ,Green LED,Blue LED |
|
Reaction time | 200us(HSP)/1ms(FINE) |
|
Indicator | Output:Red LED,External synchronization input:Red LED, Matching rate/received light intensity:LED(green/red) |
|
Error display | Excessive intensity,lack of light intensity,lack of color difference |
|
Calibration method | Single point/two point calibration |
|
Error value adjustment | Digital display number setting |
|
Differential identification model | Mode C/mode C+1/mode l | Mode C/mode C+1/mode l |
|
Timing function | Timer OFF/ON delay/OFF delay/Single shot |
|
Output selection | Match output:when target color meels record connect. Mismatch output:when the target color is different from the record color,connect it |
|
External synchronization input | Reaction speed:max.500us |
|
External calibration input | Input reaction time:max.500us |
|
Record color selection | Database selection(external input or key operation),no voltage input |
|
Control output | NPN(PNP):Max 40VDC max(100mA),residual voltage:Max 1.0V |
|
Circuit protection | Reserve electrode protection(power supply),over current protection(output),and over voltage(output) |
|
Power Supply | 12 to 24VDC+-10%,Pulse voltage(P-P):maximum 10% |
|
Current consumption | Max.75mA |
|
Ambient brightness | Filament lamp:Max.5000lux,sunlight:max.10000lux |
|
Ambient temperature | -10 to 55°c |
|
Relative humidity | 35 to 85% |
|
Vibration resistance | 10 to 55HZ,1.5mm double amplitude,2 hours in X,Y,Z each 2 hours |
|
Impact resistance | 500m/s² inX,Y,Z direction,each direction 3 times |
|
Case material | PC |
|
Weight(with 2m cable) | about 170g |
|
